How to Clear Computer system Codes on a Chevy Truck 1Turn ignition for the off position.2Open the hood and find the truck's battery. This may differ, depending on the truck's make, model and year Auto code scanner, but will typically be in one of many four corners with the engine compartment.
3Place the adjustable wrench on the negative battery clamp and adjust the wrench until it truly is tightly around the bolt holding on the clamp.4Loosen the unfavorable battery clamp and take away it from the negative battery terminal.5Wait for 1 minute.6Reattach the unfavorable battery clamp.7Tighten the negative battery clamp till it can be fits tightly about the unfavorable battery terminal and doesn't move.8Start the car and make sure the verify engine light is off.
How to Clear Codes on a Sterling Truck 1Remove the fuse panel cover. Pull down on the cover to take away it.2Plug the pinned connector on the diagnostic reset tool into the fuse panel input for the reset tool.3Turn the ignition important for the "II" position and wait for the light on the tool to stop flashing. When it does Auto diagnostic tools, all of the codes will probably be reset.
Related articles:
没有评论:
发表评论