Auto diagnostic tool Codes lower than 1000 are universal

The best way to Examine the Engine Code on a Tundra Obd2 scanner

1Locate the data link connector (DLC) inside the Toyota Tundra under the driver's side dashboard. It really is on the proper hand side with the steering column pointing straight down.2Plug the pocket scanner's 16-point connector to the information hyperlink connector. Due to the fact on the DLC's shape, there is only one strategy to plug it in appropriately.3Place the important inside the ignition and turn it two clicks forward for the accessory power position, with out the engine in the Tundra operating. This position will light up all the instrument panel lights.

4Follow the instructions in the pocket scanner's manual to read the diagnostic difficulty code that triggered the check-engine light. These scanners are incredibly simple to use and are virtually self-explanatory.5Scroll to the "read codes" alternative on the scanner (some scanner models may feature the letters DTCs as an alternative to codes).6Press the "Enter" or "Send" button to read the code(s) that triggered the MIL.7Refer to the manual with the scanner to identify the difficulty code. Some scanners might feature a brief description Auto diagnostic tool, although less costly scanner models may only display the code number.8Research the diagnostic trouble code on a laptop utilizing a universal diagnostic difficulty code web page (see Resources).

Codes lower than 1000 are universal, but code numbers over 1000 are specific towards the car.The best way to Examine the Engine Code on a 1994 Chevrolet Truck 1Locate the OBD port towards the left from the fuse panel inside the driver's foot well.2Plug the OBD tool in to the OBD port.3Turn the ignition key towards the "II" position and wait for the Chevy's on-board diagnostic system to download the code to the OBD tool.

Related articles: