Car Diagnostic Tools Tips on how to Access the Error Codes for a Ford Ranger

Tips on how to Access the Error Codes for a Ford Ranger

1Check the vacuum hoses connecting towards the air cleaner. It is best to have no loose or disconnected hoses. The air filter has to be in spot throughout testing.

2Start the car and permit it to run for 15 minutes or until it reaches operating temperature.

3Connect the STAR tool or equivalent to the self-test connectors positioned beneath the dash or along the energy cables coming off the good terminal of the battery.

4Turn the ignition switch to "ON" but don't get started the car. The Crucial On Engine Off codes (KOEO) will display on the readout of your device.5Start the car Car Diagnostic Tools, and rev the engine to two,000 to 3 Obd2 scanner,000 rpm until the engine code or a service code is displayed. Let the engine idle throughout the testing procedure. Record any codes which can be displayed. This is the Crucial On Engine Running (KOER) test.6Consult the dealer or a automobile manual for a definition in the error codes. The manual for the tester will contain a list with the majority on the codes.

Related articles:

• Obd2 scanner Positive
• Auto diagnostics if you know some basic automobile work theory you may be able to do that.
• Auto diagnostic tools as members of BIMRS.org