car diagnostic tool plus the TCM

How to Reset the Door Ajar Light on a 2002 Ford Explorer 1Sit inside the vehicle and close all the doors car diagnostic tool.2Find the fuse panel cover located beneath the steering column on your Explorer. Rotate the knob and pull down on it to open.3Find the biggest port inside the fuse panel and plug the diagnostic reset tool into this port.

You are able to obtain a diagnostic reset tool at your regional automobile parts retailer.4Put the essential into the ignition and turn it to the "II" position, taking care not to start the engine.5Observe the instrument panel and wait for the door ajar light to go out. The light has been reset. Take away the diagnostic reset tool and place the fuse panel cover back in location.

How to Reset the Computer system on an Audi Tiptronic Transmission 1Open the hood and loosen the 10mm retaining nut on the Audi's negative battery cable clamp working with a socket wrench GM MDI.2Slide the clamp off the battery terminal.3Wait 15 minutes. Then, reconnect the battery cable. This will reset the ECU (electronic handle module) plus the TCM (transmission control module).