Vehicle Diagnostic equipment

The way to Plug in Truck Laptop or computer Code Readers 1Shine a flashlight below your truck's steering wheel on the driver's side. Search for a plug-in connector Vehicle Diagnostic equipment, recognized as the information hyperlink connector, that is certainly about two inches in length. The connector may possibly include a plastic overlay that you just will have to lift.

Inside the connector, you can see a number of, smaller gold or silver plugs. Should you do not see the plug-in connector on the driver's side, examine the passenger’s side or around the center, bottom portion of your truck's dashboard.2Plug the OBD code reader's connection cable into the plug-in connector. The cable will go in only one way Professional diagnositic tools.3Insert your truck's keys into the ignition and turn the ignition to the “On” position, but do not crank your truck. Turn on the code reader.

The device's display will illuminate and start reading your truck's stored personal computer codes if any are present. Note that certain brands of code readers do not require to turn on your truck's ignition. Consult your code reader's manual for more information.4Follow the code reader's on-screen prompts to retrieve any stored codes. Write down the code(s) on a piece of paper and consult your truck's owner's manual or a repair manual for any description of the code(s).