Tips on how to Reset the Fault Code on a Jeep Cherokee 1Pull the release lever to open the hood from inside the automobile. The lever is located underneath the steering wheel on the dashboard.2Open the hood and location the assistance rod into position to prop up the hood.
3Remove the nut connecting the negative battery terminal for the battery, employing an open finish wrench.4Allow the personal computer to reset Obd2 scanner. This can take roughly 30 minutes.5Reconnect the negative terminal for the battery. Tighten the bolt utilizing an open end wrench.
6Close the hood and start out the engine Car Diagnostic Tools. In the event the examine engine light re-appears, there is nonetheless a problem using the engine that ought to be addressed.
没有评论:
发表评论